Premium outdoor and indoor polymer-wood composites manufactured to withstand strict European climate parameters.
The Scandinavian building and construction industry is undergoing a profound structural shift toward high-performance, ultra-durable, and environmentally sustainable materials. In Norway, where the outdoor microclimate varies from severe Sub-Arctic frost in northern regions like Tromsø to heavy rain and saltwater exposure along the southwestern coastline (Bergen and Stavanger), traditional outdoor timber cladding and pressure-treated pinewood decks require continuous, costly maintenance. Consequently, architects, commercial developers, municipal planners, and residential contractors across Norway are rapidly replacing conventional timber with advanced Outdoor Wood-Plastic Composite (WPC) Wall Panels and Co-Extruded Decking.
Key Insight for Norwegian Procurement Officers: Conventional timber facades in Scandinavia demand re-staining, oiling, and moisture sealing every 2 to 3 years to prevent rot, cupping, and fungal infestation. Our 3rd-generation co-extruded WPC composite cladding and decking eliminate these lifetime maintenance costs while achieving 100% compliance with Norway's stringent TEK17 technical building regulations.
With Norway's unwavering commitment to green building certifications (BREEAM-NOR) and low-carbon urban development, polymer-wood composites offer an ideal synergy between recycled raw material utilization and prolonged service lifespan. As direct factory manufacturers serving the Norwegian market, we provide tailored engineering solutions designed specifically to withstand northern Europe's unique environmental stressors, including extreme freeze-thaw thermal expansion cycles, high summer ultraviolet radiation, and continuous moisture loads from fjord microclimates.
Our proprietary 3.0 Co-Extrusion Shielding technology delivers unprecedented weatherability and mechanical stability.
Encapsulates the core material in an impenetrable fluoropolymer outer shield. Provides 100% resistance to moisture absorption (<0.2%), preventing freeze-cracking at sub-zero temperatures down to -40°C.
Infused with advanced light stabilizers (HALS) and anti-oxidants, protecting the deck and wall panel surface from degradation, discoloration, and chalking under midnight sun and intense high-latitude UV glare.
Engineered using 60% re-purposed hardwood fiber flour, 30% recycled high-density polyethylene (HDPE), and 10% non-toxic additives, yielding high flexural modulus (>2800 MPa) to resist heavy snow load deformations.
Our Thermal Expansion Mitigation System controls thermal contraction/expansion rates to under 0.035 mm/m/°C, preventing panel warping, joint displacement, and structural buckling across seasons.
Custom 3D deep wood-grain embossing and micro-grooved textures ensure wet-friction coefficient standards (DIN 51130 R11), offering safe footing on icy or rain-soaked outdoor walking surfaces.
Delivers a projected service lifespan exceeding 25+ years with zero painting, oiling, or chemical treatments, lowering total cost of ownership (TCO) by over 65% compared to Siberian Larch or ThermoWood.
A modernized industrial and trading enterprise delivering scale, precision, and uncompromised quality control to Nordic distributors.
Headquartered in Linyi City, Shandong Province, LINYI RICH NEW MATERIALS CO., LTD. operates an intelligent production hub spanning over 100,000 square meters and powered by more than 300 senior engineering technicians. Dedicated to pioneering technological advancements in sustainable building materials, our manufacturing eco-system integrates end-to-end raw material formulation, mold design, automated extrusion, and strict laboratory testing.
For the Norwegian market, we deploy 40 specialized high-capacity outdoor extrusion lines producing 2 million square meters annually of premium WPC wall panels and composite decking. Backed by ISO9001, ISO14001, and CE certification, our products seamlessly integrate into residential, commercial, and coastal public projects across Northern Europe.
Engineered profiles designed for specialized commercial, municipal, and residential exterior applications.
Fjord resorts, public docks, and coastal boardwalks face constant saltwater spray, fog, and ice buildup. Our co-extruded decking profiles feature zero wood-fiber exposure on the outer shell, completely eliminating rot, salt degradation, and water absorption while providing high slip resistance for tourist safety.
Modern Scandinavian architecture emphasizes clean line aesthetics and natural wood grain textures. Our fluted and 3D slatted WPC exterior wall panels integrate effortlessly into rain-screen curtain wall designs, offering rain-tight drainage channels, thermal insulation support, and long-term color stability.
Designed for private homebuilders and housing cooperatives (Borettslag) in northern Norway. Our lightweight hollow and solid composite decking boards withstand heavy winter snow accumulation without cracking, warping, or requiring post-winter power washing and re-sealing.
High-impact resistant WPC privacy fence panels and acoustic barrier louvers for urban municipal developments. Engineered with internal aluminum reinforcement slots to withstand severe Nordic wind loads (up to Beaufort Scale 11 force gusts).
To successfully supply building envelope products into the Norwegian market, strict compliance with the Norwegian Building Code (TEK17) is mandatory. Our engineering team ensures that all exported WPC wall panels and decking batches fulfill specific performance requirements:
We provide full-service logistics management tailored to Norwegian importers, wholesalers, and project contractors. Whether delivering containerized freight to major hubs like Oslo Port (Brevik), Bergen (港), Trondheim, or Stavanger, our export department handles customs documentation, certificate of origin issuing, seaworthy pallet packaging, and flexible DDP/CIF terms.
As a modernized direct-manufacturer, Linyi Rich New Materials Co., Ltd. provides comprehensive OEM/ODM engineering capabilities for Scandinavian brands, timber yards, and retail building material chains looking to build private-label WPC lines.
Over 200+ active extrusion molds, plus in-house tooling capabilities to develop proprietary board profiles, hidden clip grooves, and interlocking wall cladding systems within 15 days.
Specialized color matching service for Scandinavian design trends, including Teak, Dark Charcoal, Nordic Oak, Smoke Gray, Redwood, and Architectural Graphite finishes.
Accommodating both large-scale commercial real estate developments and medium wholesale stocking orders with mixed-container loading support.
Technical, logistical, and operational answers regarding WPC application in cold Scandinavian climates.
Our 3rd-generation co-extruded WPC composite features a ultra-dense HDPE core coated in a non-porous fluoropolymer shield. With a water absorption rate under 0.2% (compared to 15-20% for natural wood), moisture cannot penetrate the core. This completely prevents internal ice expansion, structural cracking, and surface delamination even during severe freezing conditions down to -40°C.
Yes. Our outdoor WPC facade and decking systems comply with standard European EN 15534 standards referenced by TEK17. We supply fire-rated options (Class B-s1, d0 under EN 13501-1) for facade safety, along with structural load calculations and slip-resistance test reports for municipal projects.
Our co-extrusion capped layer is formulation-infused with high-grade Hindered Amine Light Stabilizers (HALS) and inorganic ceramic pigments. Color drift is controlled to Delta E < 2.0 over 10 years, ensuring negligible visual fading under prolonged UV light exposure.
Manufacturing lead time is typically 10 to 14 days for standard container orders. Maritime transit time from Qingdao/Lianyungang port to major Norwegian ports (Oslo, Bergen, Brevik) takes approximately 30 to 38 days. We handle all export clearing and shipping documentation.
Our composite decking surfaces are deep-embossed with 3D timber grains and narrow drainage grooves achieving an R11 slip-resistance rating (DIN 51130). Water drains quickly off the surface through designed slopes, mitigating surface ice formation compared to smooth timber boards.
Yes! In addition to standard lengths (2.2m, 2.9m, 3.6m, 4.0m), our 40 automated extrusion lines can produce custom cut-to-length boards based on your architectural project drawings, reducing jobsite labor costs and scrap material.
High-performance building materials directly from Linyi Rich New Materials Co., Ltd.
Rich New Materials